The following is a news release from Master Bond Inc. You have received it because you are listed as an editor for your publication.
Attached to this email is a low resolution version of the photograph that is included in the press kit for this product.
High resolution version of this image and files with the body text of this release in Word, HTML and text formats are available at http://www.masterbond.com/newsrelease/led403med.
-----------------------------------------------------------------
Widely used in the manufacture of disposable medical devices, Master Bond LED403Med is a single component system that passes the plastics test for USP Class VI and ISO 10993-5 cytotoxicity requirements. This medical grade system withstands sterilization methods such as gamma radiation, EtO and various chemical sterilants.
Optically clear LED403Med cures fully tack-free upon exposure to a 405 nm wavelength light source without any oxygen inhibition. In thinner sections, full cures can be achieved in 15-30 seconds. However, the rate of cure depends upon the intensity of light source, the thickness of the layer and the distance of the material from the light. It has a high viscosity but remains flowable and can be used as an adhesive, sealant, coating and encapsulant in sections up to 1/8 inch thick.
Once cured, LED403Med features dimensional stability and resist chemicals including water, many acids, bases and oils. It bonds well to glass, polycarbonates and acrylics as well as metals and other plastics. The adhesive is a competent electrical insulator and offers a solid physical strength profile.
It is serviceable from -60°F to +250°F. Without contact to light, LED403Med has a shelf life of 6 months in its original, unopened containers. It is available for use in syringes, ½ pints, pints, quarts, gallons and 5 gallon pails.
Note to Editors:
For a full product description, please visit: http://www.masterbond.com/tds/led403med
Check out new videos on our YouTube channel: http://www.youtube.com/user/MasterBondVideo
You can embed any of our videos on your website.
CONTACT
James Brenner, Marketing Manager
Email: jbrenner@masterbond.com
Tel: +1-201-343-8983
Fax: +1-201-343-2132
MASTER BOND INC.
154 Hobart Street
Hackensack, NJ 07601-3922
Web: www.masterbond.com