EP30HT-LO Product Information

NASA low outgassing approved adhesive, sealant, coating and potting compound

Key Features

Superior temperature resistance
Outstanding electrical insulation properties
Meets NASA low outgassing specifications
Excellent light transmission
Superb physical strength properties
Withstands 1,000 hours 85°C/85% RH

Product Description

Master Bond EP30HT-LO is a moderate viscosity, two component epoxy system highlighted by high temperature resistance and optical clarity. This system has a non-critical four to one mix ratio by weight. The system cures easily in 24-48 hours at room temperature and more rapidly at elevated temperatures; 150-200°F in 2-3 hours. The optimum cure is overnight at room temperature followed by 2-3 hours at 150-200°F. EP30HT-LO is highly structural; it cures rigid without being brittle. It has exceptional dimensional stability and low shrinkage upon curing.

Most notably, EP30HT-LO has a robust physical strength profile, especially tensile, tensile lap shear and compressive strengths, among others. Its electrical insulation values are impressive and it is well suited for smaller potting and encapsulation applications. It bonds well to a wide variety of substrates including metals, composites, glass, ceramics and many rubbers and plastics. EP30HT-LO is highly resistant to water, oils, fuels, acids, bases and many solvents. Both Parts A and B are optically clear. Its temperature range is from -60°F to +400°F. EP30HT-LO passes ASTM E595 tests for NASA low outgassing. EP30HTLO can be specified in aerospace, electronic, optical, fiber-optic and specialty OEM industries, especially when the product properties mentioned above are desirable.