Expanded Product List
Master Bond Product Search
618 products match
 |
EP30-1LP Ultra low viscosity two component epoxy system. 100% reactive. Excellent optical clarity and light transmission properties. Ability to fill small gaps. High strength. Versatile cure schedules. Rigid bonds. Low shrinkage. Service operating temperature range from -60°F to +250°F. |
 |
EP30-1NV Low viscosity two part high performance epoxy resin system. High strength rigid bonds. Low linear shrinkage after cure. Superb light transmission properties. Serviceable from -60°F to +250°F. Cures readily at room temperature. |
 |
EP30-2 Cryogenically serviceable. NASA low outgassing approved. 100% reactive. Excellent light transmission properties. Outstanding dimensional stability. High tensile and compressive strength. Successfully tested for 1,000 hours 85°C/85% RH. Excellent dielectric properties. Serviceable from 4k to +300°F. |
 |
EP30-2LB Optically clear epoxy that blocks UV light from 200 nm to about 400 nm. Transmits well from 450-900 nm and above. Structural adhesive. Passes NASA low outgassing tests. Electrical insulator. Cures at room temperature. Epoxy flows smoothly. Dimensionally stable. Low shrinkage upon cure. Serviceable from -80°F to +300°F. |
 |
EP30-3 Heat curable, optically clear epoxy. Serviceable from -80°F to 450°F. Excellent dimensional stability. T >325°F. Shore D hardnes >75. Outstanding dielectric strength. First rate chemical resistance. Low viscosity. Long working life. Easy to apply. |
 |
EP30-3LO Superb optical clarity. Serviceable from -80°F to +450°F. T >175°C. Low viscosity and long working life. Superior dielectric properties. NASA low outgassing approved. Withstands 1,000 hours 85°C/85% RH. |
 |
EP30-4 Rapid room temperature curing two component epoxy system. Low viscosity. Optically clear and non-yellowing. Superior chemical resistance. Superb electrical insulation properties. Cures quickly even in thin sections. High bond strength. Two to one mix ratio by weight. Low shrinkage. Shore D hardnes >80. Serviceable from -60°F to +250°F. |
 |
EP30-4Med Rapid room temperature curing two component epoxy system. Low viscosity. Optically clear and non-yellowing. Superior chemical resistance. Superb electrical insulation properties. Cures quickly even in thin sections. High bond strength. Two to one mix ratio by weight. Low shrinkage. Shore D hardnes >80. Serviceable from -60°F to +250°F. |
 |
EP30AN Epoxy features superior heat transfer properties. High impact strength. Abrasion resistant. Low CTE. Excellent flowability. Ideal for potting and encapsulation. Serviceable from -60°F to +250°F. |
 |
EP30AN-1 Thermal conductive/electrically insulative epoxy cures at room temperature. Outstanding heat dissipative properties. Serviceable from -60°F to +250°F. Low viscosity. Suitable for potting/encapsulation. NASA approved for low outgassing. |